Baby Doll – Free crochet pattern

• La traduzione italiana può essere trovata qui. Le abbreviazioni corrispondenti in inglese sono qui.
• La traduction française peut être trouvée ici. Les abréviations correspondantes en anglais sont ici.
• La traducción al español se puede encontrar aquí. Las abreviaturas correspondientes en inglés están aquí.
• A magyar fordítás itt található. A megfelelő angol rövidítések itt találhatók.
• Traducerea in limba română o puteți găsi aici. Abrevierile corespondente în engleză le găsiți aici.

Recently Julia Miazina made available to all amigurumi doll lovers a series of 8 videos with this beautiful baby doll. I transcribed the pattern, but still to make the eyes and hair you will have to watch the videos I mentioned in this post. The Russian designer has an absolutely surprising way to make the doll’s eyes with only embroidery thread and transparent glue. I find it much easier to make than to embroider them with a needle. Also, if you don’t want to make her hair with acrylic thread, as suggested, you can use wavy synthetic hair for dolls to sew on her head. Also, if you like, you can use dry colors or even makeup for a look as close as possible to the original doll.

The all videos are here: https://www.youtube.com/playlist?list=PLAhnijH9Dyj_Zf_o5vbt2dslYZ0BBJRZ9

MATERIALS:

• Cotton yarn 280m/50g for the body (skin color)
• Cotton yarn 150m/25g for the clothes (white and red)
• Acrylic yarn 133m/50g for the hair or wavy synthetic hair for dolls
• Hook 0,6 mm
• Aluminum wire (1mm diameter for hands and 2mm diameter for legs and head)
• Cotter pin (1,2 x 16mm for hands, 1,2 x 20mm for legs)
• Cardboard disc (6mm for hands, 15mm for legs)
• Electrical tape
• Embroidery thread: black, white, green, dark green.
• 2 buttons 16 mm in diameter for the panties
• 1 snap clasp for the hairband
• 1 decoration for the hairband of your choice
• Transparent glue for fabrics
• Makeup or dry colors

Abbreviations: here

ATTENTION: It crochets in the wrong side!

Skill level: ADVANCED

RIGHT ARM

• 1. 4ch, from the second ch from hook make 3slst (little finger)
• 2-4. 5ch, 4slst on the chain (ring finger, middle finger, index finger)
• 5. 5sc on one side, [(1sc, inc)x 2, 1sc] – on the other side = 12
• 6. 12sc
• 7. 4ch, 3sc on the chain (the thumb), 12sc
• 8. 2sc (in the first and last loop of the thumb), 12sc = 14
• 9. 9sc, 5sc in FLO = 14
• 10. 1dec, 7sc, (2sc, inc, 2sc)-in BLO of the 9^th row = 14
• 11-16. 14sc (6rds)
• 17. 4sc, dec, 8sc = 13
• 18-20. 13sc (3rds)
• 21. 4sc, dec, 7sc = 12
• 22-23. 12sc
• 24. 4sc, dec, 6sc = 11
• 25-26. 11sc
• 27. 5sc, 1ch, sk 1st, 5sc = 11

Bend the wire 1cm at the top and wrap it with electrical tape, insert the wire in the hand and stuff it.

The length of the wire is the same as the length of the hand up to this point.

Put the cotter pin with the cardboard disc in the hole of the 27^th row. Continue to crochet:

• 28. 2dec, 2sc, 2dec = 6
• 29. 1dec and close the hole.

LEFT ARM

• 1-3. 5ch, 4slst on the chain (index finger, middle finger, ring finger)
• 4. 4ch, 3slst on the chain (little finger)
• 5. 5sc on one side, [(1sc, inc)x 2, 1sc on the ring finger] – on the other side = 12
• 6. 12sc
• 7. 5sc, 4ch, 3sc on the chain (the thumb), 7sc
• 8. 5sc, 2sc (in the first and last loop of the thumb), 7sc = 14
• 9. 8sc, 5sc in FLO, 1sc = 14
• 10. 6sc, dec, (2sc, inc, 2sc)-in BLO of the 9^th row, 1sc = 14
• 11-16. 14sc (6rds)
• 17. 3sc, dec, 9sc = 13
• 18-20. 13sc (3rds)
• 21. 3sc, dec, 8sc = 12
• 22-23. 12sc
• 24. 3sc, dec, 7sc = 11
• 25-26. 11sc
• 27. 5sc, 1ch, sk 1st, 5sc = 11

Bend the wire 1cm at the top and wrap it with electrical tape, insert the wire in the hand and stuff it.

The length of the wire is the same as the length of the hand up to this point.

Put the cotter pin with the cardboard disc in the hole of the 27^th row. Continue to crochet:

• 28. 2dec, 2sc, 2dec = 6
• 29. 1dec and close the hole.

LEFT LEG

• Before starting, leave the 50cm long thread, used later for crocheting the heel.
• 1. 3ch, 2sc on the chain – big toe
• 2. 4ch, 2sc on the chain, the last ch doesn’t work
• 3. 3ch, 2slst on the chain
• 4. 3ch, 2slst on the chain
• 5. 2ch, 1slst
• 6. 7sc on one side, 1sc, inc, 2sc, inc, 1sc = 15
• 7-9. 15sc (3rds)
• 10. 3sc, dec, 4sc, 6sc in FLO = 14
• Take the thread left for the heel and crochet from the third stitch from the end of the round n° 10:  4sc, 1ch, turn (4rds) FO. Back to the main thread!
• 11. 1dec, 3sc on one side on the heel, (1sc, dec, 1sc)-on the top of the heel, 3sc on the other side of the heel, 1dec, (1sc, inc, 2sc, inc, 1sc)-in BLO of the 10^th row = 19
• 12. 19sc
• 13. 5sc, dec, 8sc, inc, 3sc = 19
• 14. 5sc, 2inc in BLO, 12sc = 21
• 15-18. 21sc (4rds)
• 19. 5sc, 2dec, 12sc = 19
• 20. 4sc, 5sc in FLO, 5sc, (inc, 1sc, inc)-in BLO, 2sc = 21
• 21. 4sc, (2inc, 1sc, 2inc)- in the remaining loops of the 20^th row, 12sc = 25
• 22. 6sc, (inc, 1sc)x 2, inc, 7sc, dec, 1sc, dec, 2sc = 26
• 23. 8sc, inc, 2sc, inc, 8sc, dec, 2sc, dec = 26
• 24. 23sc, dec, 1sc = 25
• 25-30. 25sc (6 rds)
• 31. 5sc, (dec, 4sc)x 2, 1ch, sk 1st, 5sc, dec = 22
• 32. (4sc, dec)x 2, 8sc, dec = 19
• Bend the wire 1cm at the top and wrap it with electrical tape, insert the wire in the leg and stuff it.
• The length of the wire is the same as the length of the leg up to this point.
• Put the cotter pin with the cardboard disc in the hole of the 31^th row. Continue to crochet:
• 33. 3sc, dec, 4sc, dec, 6sc, dec = 16
• 34. 2sc, dec, 3sc, dec, 5sc, dec = 13
• 35. 7dec, close the hole. FO.

RIGHT LEG

Before starting, leave the 50cm long thread, used later for crocheting the heel.

• 1. 2ch, 1slst  – little toe
• 2. 3ch, 2sc on the chain
• 3. 3ch, 2slst on the chain
• 4. 3ch, 2slst on the chain
• 5. 4ch, 2sc on the chain, the last ch doesn’t work
• 6. 7sc on one side, 1sc, inc, 2sc, inc, 1sc = 15
• 7-9. 15sc (3rds)
• 10. 3sc, dec, 3sc, 6sc in FLO, 1sc = 14
• Take the thread left for the heel and crochet from the third stitch from the end of the round n° 10:  4sc, 1ch, turn (4rds) FO. Back to the main thread!
• 11. 1dec, 3sc on one side on the heel, (1sc, dec, 1sc)-on the top of the heel, 3sc on the other side of the heel, 1dec, (1sc, inc, 2sc, inc, 1sc)-in BLO of the 10^th row = 19
• 12. 19sc
• 13. 5sc, dec, 8sc, inc, 3sc = 19
• 14. 5sc, 2inc in BLO, 12sc = 21
• 15-18. 21sc (4rds)
• 19. 5sc, 2dec, 12sc = 19
• 20. 4sc, 5sc in FLO, 6sc, (inc, 1sc, inc)-in BLO, 1sc = 21
• 21. 4sc, (2inc, 1sc, 2inc)- in the remaining loops of the 20^th row, 12sc = 25
• 22. 6sc, (inc, 1sc)x 2, inc, 8sc, (dec, 1sc)x 2 = 26
• 23. 8sc, inc, 2sc, inc, 8sc, dec, 2sc, dec = 26
• 24. 23sc, dec, 1sc = 25
• 25-30. 25sc (6 rds)
• 31. 1dec, 5sc, 1ch, sk 1st, (4sc, dec)x 2, 5sc = 22
• 32. 1dec, 8sc, (dec, 4sc)x 2 = 19
• Bend the wire 1cm at the top and wrap it with electrical tape, insert the wire in the leg and stuff it.
• The length of the wire is the same as the length of the leg up to this point.
• Put the cotter pin with the cardboard disc in the hole of the 31^th row. Continue to crochet:
• 33. 1dec, 6sc, dec, 4sc, dec, 3sc = 16
• 34. 1dec, 5sc, dec, 3sc, dec, 2sc = 13
• 35. 7dec, close the hole. FO.

BODY

• 1. 6sc in MR
• 2. 6inc = 12
• 3. (inc, 1sc)x 6 = 18
• 4. (inc, 2sc)x 6 = 24
• 5. (inc, 3sc)x 6 = 30
• 6. 1sc, 4inc, 7sc, inc, 4sc, inc, 7sc, 4inc, 1sc = 40
• 7. 40sc
• 8. 1sc, (1sc, inc)x 3, 9sc, inc, 6sc, inc, 9sc, (inc, 1sc)x 3, 1sc = 48
• 9. 13sc, 1ch, sk 1st, 20sc, 1ch, sk 1st, 13sc = 48
• 10. 19sc, inc, 8sc, inc, 19sc = 50
• 11. 50sc
• 12. 13sc, inc, 22sc, inc, 13sc = 52
• 13. 14sc, inc, 22sc, inc, 14sc = 54

Insert the cotter pin of the legs in the holes of 9th row and place the 15mm diameter cardboard disc to attach the legs to the body.

• 14. 54sc
• 15. (1sc, dec)x 3, 5sc, dec, 22sc, dec, (dec, 1sc)x 3 = 46
• 16. 46sc
• 17. (1sc, dec)x 2, 34sc, (dec, 1sc)x 2 = 42
• 18-20. 42sc (3rds)
• 21. 15sc, (dec, 1sc)x 5, 12sc = 37
• 22-23. 27sc
• 24. 11sc, 1ch, sk 1st, 18sc, 1ch, sk 1st, 6sc = 37
• 25-26. 37sc
• 27. 7sc, dec, 5sc, dec, 10sc, dec, 5sc, dec, 2sc = 33

Insert the cotter pin of the hands in the holes of 24th row and place the 6mm diameter cardboard disc to attach the hands to the body.

• 28. 6sc, dec, 5sc, dec, 8sc, dec, 5sc, dec, 1sc = 29
• 29. 5sc, dec, 5sc, dec, 6sc, dec, 5sc, dec = 25
• 30. 7sc, 2dec, 8sc, 2dec, 2sc = 21

Cut a piece of wire 10-11 cm long or more. Bend the wire 2cm at the top and wrap it with electrical tape. Insert it to the body leaving about 5 cm of wire outside. Stuff the body!

• 31. 21sc
• 32. 10dec, skip the last stitch of the row = 10
• 33-51. 10sc  (19rds) FO. Close the hole. Cut the wire if it is longer.

HEAD

• 12ch, 1slst in the first ch (connect into a ring), 1ch
• 1-2. 12sc, 1slst, 1ch
• 3-4. 12sc (crochet in spiral)
• 5. 12inc in FLO = 24
• 6. 6sc, inc3sc, 5sc, inc3sc, 5sc, inc3sc, 5sc = 30
• 7. 7sc, inc, 7sc, inc3sc, 7sc, inc, 6sc = 34
• 8. 7sc, inc, 9sc, inc3sc, 9sc, inc, 6sc = 38
• 9. 7sc, inc, 11sc, inc3sc, 11sc, inc, 6sc = 42
• 10. 7sc, inc, 13sc, inc3sc, 13sc, inc, 6sc = 46
• 11. (inc, 2sc)x 2, 37sc, inc, 2sc = 49
• 12. 1sc, (inc, 3sc)x 2, inc, 31sc, (inc, 3sc)x 2 = 54
• 13. (inc, 4sc)x 2, 39sc, inc, 4sc = 57
• 14. 14sc, inc, 6sc, inc, 7sc, 5sc in FLO, 7sc, inc, 6sc, inc, 8sc = 61
• 15. 3sc, inc, 6sc, inc, 20sc, 5sc in FLO, 20sc, inc, 4sc = 64
• 16. 64sc
• 17. 35sc, (1slst, 6sc, 1slst) – in the same stitch  in BLO, 28sc = 71
• 18. 35sc, 1slst, 6sc, 1slst, 28sc = 71
• 19. 24sc, 4dec, 3sc, (sk 1st, 1sc)x 4, 3sc, 4dec, 14sc = 59
• 20. 17sc, inc, 14sc, dec3sc, 14sc, inc, 9sc = 59
• 21-22. 59sc
• 23. 26sc, inc, 14sc, inc, 17sc = 61
• 24-34. 61sc (11rds)
• 35. (dec, 10sc)x 5, skip the last stitch = 55
• 36. (dec, 9sc)x 5 = 50
• 37. (dec, 8sc)x 5 = 45
• 38. (dec, 7sc)x 5 = 40
• 39. (dec, 6sc)x 5 = 35
• 40. (dec, 5sc)x 5 = 30
• Tuck inside of the head the first 4 rounds. Screw the head on the neck! Then stuff the head tightly.
• 41. (dec, 4sc)x 5 = 25
• 42. (dec, 3sc)x 5 = 20
• 43. (dec, 2sc)x 5 = 15
• 44. (dec, 1sc)x 5 = 10
• 45. 5dec = 5. FO. Close the hole.
• Cut 2 pieces of thread 30cm long.
• Attach the thread in the remaining loops of 15^th row:
• Upper lip = 1sc, inc, 1sc, 1slst
• Attach the second thread in the remaining loops of 14^th row:
• Lower lip = 3sc, 1slst

EARS x2

• 1. in MR: 1hdc, 7dc, 1sc, 1ch, turn = 18
• 2. 1slst, 1hdc, 2dc, 1inc-dc, 2hdc, 1sc, 1slst = 10. Close the ring.

Sew the ears after embroider the eyes in this way, watching video here.

Make the hair with Acrylic yarn, watch the video here.

PANTIES

• 1. 19ch, from the second ch make: 18sc, 1ch, turn
• 2. dec, 14sc, dec, 1ch, turn = 16
• 3. dec, 12sc, dec, 1ch, turn = 14
• 4. 14sc, 1ch, turn
• 5. dec, 10sc, dec, 1ch, turn = 12
• 6-7. 12sc,1ch, turn
• 8. dec, 8sc, dec, 1ch, turn = 10
• 9. 10sc, 1ch, turn
• 10. dec, 6sc, dec, 1ch, turn = 8
• 11-16. 8sc, 1ch, turn (6rds)
• 17. inc, 6sc, inc, 1ch, turn = 10
• 18. 10sc, 1ch, turn
• 19. inc, 8sc, inc, 1ch, turn = 12
• 20. 12sc, 1ch, turn
• 21. inc, 10sc, inc, 1ch, turn = 14
• 22. 14sc, 1ch, turn
• 23. inc, 12sc, inc, 1ch, turn = 16
• 24. inc, 14sc, inc, 1ch, turn = 18
• 25. inc, 16sc, inc, 1ch, turn = 20
• 26. inc, 18sc, inc, 1ch, turn = 22
• 27. 22sc, 10ch. FO. Cut the thread.
• Attach the thread in the beginning of the of 27^th row:
• 28. 10ch, 9sc on the chain, 22sc, 9sc on the chain, 1ch, turn = 40
• 29. 40sc, 1ch, turn
• 30. Crochet single crochets  (sc) all around  the panties.

Sew the buttons to the sides at the last rows of the panties!

Make 2 chains of 10 ch and sew them on the other side of the panty, these will be the buttonholes.

Put the panties on the doll!

HAIRBAND

• Make 136ch (can be more and less ch; it depends on the thread and the size of your doll’s head)
• From the second ch from hook make: 1slst, 1sc, 1hdc, 4dc, 6tr, 109dc, 6tr, 4dc, 1hdc, 1sc, 2slst in the same st, and on the other side of the chain: 1sc, 1hdc, 4dc, 6tr, 109dc, 6tr, 4dc, 1hdc, 1sc, 1slst = 270
• Sew the snap clasp on the hairband as in the photo. Then sew the chosen decoration.
• Put the hairband on the doll’s head!

The whole list of videos is here.

If you like this article you can use the button below to support this website: