MIA Doll – Free crochet pattern by MyazinaDolls

• La traduzione italiana può essere trovata qui. Le abbreviazioni corrispondenti in inglese sono qui.
• La traduction française peut être trouvée ici. Les abréviations correspondantes en anglais sont ici.
• La traducción al español se puede encontrar aquí. Las abreviaturas correspondientes en inglés están aquí.
• A magyar fordítás itt található. A megfelelő angol rövidítések itt találhatók.
• Traducerea in limba română o puteți găsi aici. Abrevierile corespondente în engleză le găsiți aici.

The doll is crocheted only on the wrong side. She is 21 cm tall (with the materials mentioned).

Materials:

• Cotton yarn (50g/280m): skin color, white
• Cotton yarn (50g/475m): white, pink and red
• Furry yarn – for the tail, the edge of the ears, heart on the bodysuit and the buttons on the shoes
• Acrylic yarn for hair (or synthetic hair)
• Hook 0.6 mm
• 1mm thick copper wire – 70 cm long
• Scissors
• Tapestry and embroidery needle
• Duct tape
• Velcro tape
• Fiberfill for stuffing
• Embroidery threads: black, white, brown, dark blue, blue, light blue
• Blush

RIGHT ARM  (watch here)

With skin color yarn (50g/280m):
Little finger: 4 ch, 3 slst. (4)
Ring finger: 5 ch, 4 slst. (5)
Middle finger: 5 ch, 4 slst. (5)
Index finger: 5 ch, 4 slst. (5)
1) 4 sc on one side of the fingers, then on other side: sc, 2 inc, sc (10)
2) (5 ch, 4 slst)- thumb, 10 sc. (10) Put the marker!
3) 2 sc in the thumb, 10 sc. (12)
4) (dec, 4 sc)*2. (10)
5) Dec, 8 sc. (9)
6-9) 9 sc. (4 rounds)
10) 5 sc, inc, 3 sc. (10)
11-16) 10 sc. (6 rounds)
17) dec, 8 sc. (9)
18-31) 9 sc. (14 rounds)
Work 3 sc more to reach the middle of the future armpit, then work 1slst, 1ch, and cut the thread.

LEFT ARM (watch here)

With skin color yarn (50g/280m):
Index finger: 5 ch, 4 slst. (5)
Middle finger: 5 ch, 4 slst. (5)
Ring finger: 5 ch, 4 slst. (5)
Little finger: 4 ch, 3 slst. (4)
1) 4 sc on one side of the fingers, then on other side: sc, 2 inc, sc (10)  
2) 4 sc, (5 ch, 4 slst)- thumb, 6 sc. (10) Put the marker!
3) 4 sc, 2 sc in the thumb, 6 sc. (12)
4) (4 sc, dec)*2. (10)
5) 4 sc, dec, 4 sc. (9)
6-9) 9 sc. (4 rounds)
10) inc, 8 sc. (10)
11-16) 10 sc. (6 rounds)
17) 5sc, dec, 3 sc. (9)
18-31) 9 sc. (14 rounds)
Work 5 sc more to reach the middle of the future armpit, then work 1slst, 1ch, and cut the thread.

LEFT LEG (watch here)

With skin color yarn (50g/280m):
1) 7 ch, from the second ch from hook: 5 sc, inc3sc, and 5 sc on the other side of the chain. (13) Place the marker!
2) inc, 5 sc, inc, 6 sc. (15)
3) 8 sc, inc, 6 sc. (16)
4) 5 sc, inc, 10 sc. (17)
5) 17 sc. (17)
6) 6 sc, inc, 10 sc, 1ch, turn. (18)
HEEL:  

            a) 5 sc, ch, turn
            b) 5 sc, ch, turn
            c) 5 sc, turn
7) 2 sc, dec, sc, 3 sc – on the side part of the heel, 11 sc, dec, 3 sc – on the side part of the heel (22)
8) 1 sc, dec, 19 sc. (21)
9-13) 21 sc. (5 rounds)
14) 1 sc, dec, 18 sc. (20)
15-19) 20 sc. (5 rounds)
Take a copper wire size 1mm and cut about 25 cm of it. Bend it as shown in the video and wrap it with the tape. Leave about 5-6 cm of the wire without a cover at the end, slightly bend the wire and place it
inside the foot, stuff it.
20) sc, dec, 17 sc. (19)
21-25) 19 sc. (5 rounds) Stuff
26) sc, dec, 16 sc. (18)
27-30) 18 sc. (4 rounds)
31) sc, dec, 15 sc. (17)
32-35) 17 sc. (4 rounds)
36) 7 sc, inc, 2 sc, inc, 6 sc. (19) – Stuff the leg
37) inc, 18 sc. (20)
38-43) 20 sc. (6 rounds)
44) sc, inc, 18 sc. (21)
45-46) 21 sc. (2 rounds) – Stuff the leg
47) 2 sc, inc, 18 sc. (22)
48-49) 22 sc. (2 rounds)
50) 3 sc, inc, 18 sc. (23)
51-56) 23 sc. (6 rounds)
57) 11 sc – The row should end approximately in the middle of the thigh, other way work a few more sts.
Make 1 slst, 1 ch and cut the thread.
Stuff the leg

RIGHT LEG (watch here)

With skin color yarn (50g/280m):
1) 7 ch, from the second ch from hook: 5 sc, inc3sc, and 5 sc on the other side of the chain. (13) Place the marker!
2) inc, 5 sc, inc, 6 sc. (15)
3) 8 sc, inc, 6 sc. (16)
4) 12 sc, inc, 3 sc. (17)
5) 17 sc. (17)
6) 13 sc, inc, 3 sc. (18) Make 7 sc more,  1ch and turn.

HEEL:  

            a) 5 sc, ch, turn
            b) 5 sc, ch, turn
            c) 5 sc, turn
7) 2 sc, dec, sc, 3 sc on the side part of the heel, 11 sc, dec, 3 sc on the side part of the heel. (22)
8) Sc, dec, 19 sc. (21)
9-13) 21 sc. (5 rounds)
14) Sc, dec, 18 sc. (20)
15-19) 20 sc. (5 rounds)
Take a copper wire size 1mm and cut about 25 cm of it. Bend it as shown in the video and wrap it with the tape. Leave about 5-6 cm of the wire without a cover at the end, slightly bend the wire and place it
inside the foot, stuff it.
20) sc, dec, 17 sc. (19)
21-25) 19 sc. (5 rounds) Stuff
26) sc, dec, 16 sc. (18)
27-30) 18 sc. (4 rounds)
31) sc, dec, 15 sc. (17)
32-35) 17 sc. (4 rounds)
36) 9 sc, inc, 2 sc, inc, 4 sc. (19) – Stuff the leg
37) 2sc, inc, 16 sc. (20)
38-43) 20 sc. (6 rounds)
44) 3 sc, inc, 16 sc. (21)
45-46) 21 sc. (2 rounds) – Stuff the leg
47) 4 sc, inc, 16 sc. (22)
48-49) 22 sc. (2 rounds)
50) 5 sc, inc, 16 sc. (23)
51-56) 23 sc. (6 rounds)
57) 2 sc – The row should end approximately in the middle of the thigh, other way work a few more sts. Don’t cut the thread! Stuff the leg!

BODY (watch here)

With skin color yarn (50g/280m):
Make 2 ch from the right leg, then continue to work the first round on the left leg (you need to begin at the point where you cut the thread on the left leg):
1) 11 sc, dec, 3 sc, 6 inc in BLO, sc, 2 sc in the chain, sc, 6 inc in BLO, 3 sc, dec, 11 sc, 2 sc in the chain. (60) – Put the marker
2) 60 sc. (60)
3) 15 sc, (inc, 2 sc)*4, 4 sc, (2 sc, inc)*4, 17 sc. (68)
4) 68. (68)
5) 11 sc, dec, 40 sc, dec, 13 sc. (66)
6) 66 sc. (66)
7) 19 sc, dec, 22 sc, dec, 21 sc. (64)
8) 11 sc, dec, 7 sc, dec, sc, skip 16 sts, sc, dec, 7 sc, dec, 13 sc. (44)
Twist the two wires from legs between each other.
9) 13 sc, dec, 2 sc, dec, 5 sc, dec, 2 sc, dec, 14 sc. (40)
10) 13 sc, dec, 9 sc, dec, 14 sc. (38)
11) 13 sc, dec, sc, 2 dec, sc, dec, 15 sc. (34)
12) 13 sc, dec, 2 sc, dec, 15 sc. (32)
13) 12 sc, dec, 2 sc, dec, 14 sc. (30)
14) 11 sc, dec, 2 sc, dec, 13 sc. (28)
Stuff tight the bottom part of the body.
15-16) 28 sc. (2 rds)
17) 24 sc – place the marker
18) inc, 7 sc, inc, 19 sc. (30)
19) 17 sc, inc, 5 sc, inc, 6 sc. (32)
20) inc, sc, inc, 5 sc, inc, sc, inc, 21 sc. (36)
21) 36 sc. (36)
22) 2 sc, dec, 7 sc, dec, 23 sc. (34)
23) 34 sc. (34)
24) dec, 10 sc, dec, 16 sc, 2 sc body + right arm, 2 sc. (32)
25) 14 sc, 2 sc body + left arm, 12 sc, 7 sc in the right shoulder, 2 sc.
(37)
Take a wire and bend it at one end for 0.5 cm and wrap it with a tape, place the wire inside the arm and measure how much more wire you will need for the second arm. Repeat the same for the second end of
the wire, put the wire inside the arms (you need to place this wire between the two wires from the body), twist the two wires above the arms wire. Stuff the body and the arms.
26) dec, 8 sc, dec, 2 sc, 7 sc in the left shoulder, 21 sc. (40)
27-28) 40 sc. (40) – Stuff the body
29) 30 sc, 5 dec. (35)
30) 10 sc, 5 dec, 9 sc, 3 dec. (27)
31) dec, 6 sc, 4 dec, 7 sc, 2 dec. (20) – Stuff tight
32) dec, 5 sc, 3 dec, 7 sc. (16)
33) 2 sc, dec, 12 sc. (15)
34-37) 15 sc. (4 rounds) – Stuff the neck, wrap with the tape the rest of the wire
38) 15 sc. (15) – Stuff the back side of the neck.
39) 5 dec, sc, 2 dec. (8)
40-54) 8 sc. (15 rounds)
Cut the excess wire, cut the thread, close the hole with the remaining tip. Hide the tip of the thread inside. Shape the doll body with your fingers to give it the finished look.

HEAD (watch here)

With skin color yarn (50g/280m):
Make 11 ch . Close the chain into a ring with 1 slst.
1-4) 11 sc. (4 rds)
5) In FLO all this row: 5 inc, inc3sc, 5 inc. (23) – place the marker
6) (5 sc, inc3sc)*3, 5 sc. (29)
7) 6 sc, inc3sc, 7 sc, inc3sc, 7 sc, inc3sc, 6 sc. (35)
8) (sc, inc)*2, 3 sc, (inc3sc, 9 sc)*2, inc3sc, 3sc, (inc, sc)*2. (45)
9) sc, (inc, 2 sc)*2, 31 sc, (2 sc, inc)*2, sc. (49)
10) 24 sc, dec, 23 sc. (48)
11) 48 sc. (48)
12) (2 sc, inc)*3, 15 sc, inc, 15 sc, (inc, 2 sc)*2, inc, sc. (55)
13) 28 sc, (in the same st in BLO: slst, 1ch, sc, 1ch, slst), 26 sc. (55)
14) 28 sc, 1 sc in the nose, 26 sc. (55)
15) 21 sc, 2 dec, 7 sc, 2 dec, 19 sc. (51)
16-17) 51 sc. (2 rds)
18) 21 sc, inc, 10 sc, inc, 18 sc. (53)
19-26) 53 sc. (8 rds)
27) (dec, 8 sc)*5, 3 sc. (48)
28) (dec, 7 sc)*5, 3 sc. (43)
29) (dec, 6 sc)*5, 3 sc. (38)
30) (dec, 5 sc)*5, 3 sc. (33)
31) (dec, 4 sc)*5, 3 sc. (28)
Push the first 4 rows inside the head. Put the head on the doll’s
body and stuff it.
32) (dec, 3 sc)*5, 3 sc. (23)
33) ( dec, 2 sc)*5, 3 sc. (18)
Stuff the top of the head
34) (dec, sc)*6. (12)
Add more stuffing in the top, don’t leave empty spaces inside of the head.
35) 6 dec. (6)
Cut the thread and close the remaining hole. If necessary, add more stuffing in the cheeks and chin. Sculp the head with your fingers. Push back the eyes area with your fingers. Put the head on the neck, don’t fix it yet.

Face embroidery and hair attachment. There are 2 videos: here and here .

Acrylic hair: watch here

How to put synthetic hair: watch here or: here

BODYSUIT

With red color yarn – (50g/475m):

1) 47 ch and from the second ch from hook: 46 sc, 1ch, turn. (46)

2) 46 sc, 1ch, turn
3) 7 sc, CH 6, skip 8 sts, 16 sc, CH 6, skip 8 sts, 7 sc, 1ch, turn.
(42)
4) 7 sc, 6 sc in the chain, 16 sc, 6 sc in the chain, 7 sc, 1ch, turn.
(42)
5) 15 sc, inc, 10 sc, inc, 15 sc, 1ch, turn. (44)
6)-11) 44 sc, 1ch, turn. (44)
12) 4 sc, inc, 34 sc, inc, 4 sc, 1ch, turn. (46)
13)-14) 46 sc, 1ch, turn. (46)
15) 6 sc, inc, 32 sc, inc, 6 sc. (48)
16) 5 sc, inc, 36 sc, inc, 5 sc, 1ch, turn. (50)
17) 8 sc, inc, 32 sc, inc, 8 sc, 1ch, turn. (52)
18) 4 sc, inc, 42 sc, inc, 4 sc, 1ch, turn. (54)
19) 7 sc, inc, 38 sc, inc, 7 sc, 1ch, turn. (56)
20) 6 sc, inc, 42 sc, inc, 6 sc, 1ch, turn. (58)
21) 8 sc, inc, 40 sc, inc, 5 sc

Then put 3 stitches of one side of the bodysuit on 3 stitches of the opposite side and work 3 sc across the two layers of the bodysuit. Then work slst, 1ch and turn.

22)-26) 57 sc, 1ch, turn. (57) Cut the thread.
Count 11 stitches to the right from the end of the 26th row and attach the thread.

BACK SIDE OF THE BODYSUIT
1) 22 sc, turn. (22)
2) 3 slst, 1ch, 16 sc, turn. (16)
3) 3 slst, 1ch, 10 sc, turn. (10)
4) 3 slst, 1ch, 4 sc, turn. (4)
5)-7) 4 sc, 1ch, turn. (4) Cut the thread.

Count 6 stitches from the first row of the back side of the bodysuit and attach the thread.

FRONT PART OF THE BODYSUIT
1) 23 sc, turn. (23)
2) 5 slst, 1ch, 13 sc, turn. (13)
3) 3 slst, 1ch, 7 sc, turn. (7)
4) 2 slst, 1ch, 4 sc, turn. (4)
5)-8) 4 sc, 1ch, turn. (4) Cut the thread.
Sew the back and the front sides together.

After that you need to decorate the edges of the bodysuit with a white yarn. Crochet 3 sc in one stitch along the edges. And sew the Velcro tape at the back.

You can also make a “bunny tail” with a furry yarn. Just crochet a ball with it and sew it to the back of the bodysuit.

You can decorate the bodysuit at your will.With furry yarn make a chain and sew it in a shape of a heart to the front side of the bodysuit.

BUNNY HEADBAND

EARS – Cotton yarn (50g/475m)
Make 2 pairs of EARS (2 should be made with pink color yarn and other 2 should be made with white color yarn).
1) 20 ch, from the third ch from hook: 7 dc, 8 tr, 2 dc, 3 dc in the last st, then on the other side of the
chain: 2 dc, 8 tr, 7 dc, 2ch, turn. (37)
2) 18 dc, 3 dc in one st, 18 dc. (39)
Use the same pattern to make 3 ears more.

Sew the ears (1 pink ear + 1 white ear).
Next, you need to cut 11 cm of the flat wire and apply some adhesive on it and wrap it with the white thread.
You can also sew the furry thread along the edge of the ears and sew them to the wire. You can also share the pink part of the ear.

SHOES

With white color yarn (50g/280m):
Inner sole
1) 6 ch, from the second ch from hook: inc, 3 sc, 4 sc in the last st, 3 sc, inc, slst, 1ch. (14)
2) 2 inc, 3 sc, 4 inc, 3 sc, 2 inc, slst, 1ch. (22)
3) sc, 2 inc, 5 sc, 2 inc, 2 sc, 2 inc, 5 sc, 2 inc, sc, slst. (30) Cut the thread.

Make the second part using the same pattern above.
Base sole
1) 6 ch, from the second ch from hook: inc, 3 sc, 4 sc in the last st, 3 sc, inc, slst, 1ch. (14)
2) 2 inc, 3 sc, 4 inc, 3 sc, 2 inc, slst, 1ch. (22)
3) 1 sc, 2 inc, 5 sc, 2 inc, 2 sc, 2 inc, 5 sc, 2 inc, 1 sc, 1slst. (30)
4) 2 sc, inc, 1 sc, inc, 5 sc, (inc, 1 sc)*2, 1slst in FLO, 1ch. – the row should end up at this point.
5) 34 sc in FLO, slst, CH. (34)
6) 34 sc, slst. (34)
Cut the thread, but leave the tip about 40 cm to sew the soles. Put one piece of the inner sole inside the base sole, then put the second inner sole above it and sew the edges of the inner sole and the base sole together.
Upper part
1) 5 ch, from the second ch from hook: 4 sc, 1ch, turn. (4)

2)-13) 4 sc, 1ch, turn. (12 rounds)
Sew the upper part to the sole. You can also decorate the shoe with a ball made of a furry yarn.
Make the second shoe. You can shade the shoes with a dry pastel at your will.

My Mia doll crocheted after this pattern:

If you like this article you can use the button below to support this website: